Cisco 7921 not updating standard time

So frankly, I have no idea what I could be missing. I hope somebody is able to point me in the right direction. A981.7F8A button 1:2 ephone 3 device-security-mode none mac-address 0006.5356.

A4B8 button 1:3 alias exec con conf t alias exec sib show ip int brief alias exec srb show run | b alias exec sri show run int line con 0 exec-timeout 0 0 logging synchronous line aux 0 line vty 0 4 privilege level 15 login local transport input telnet ssh transport output telnet ssh line vty 5 15 privilege level 15 login local transport input telnet ssh transport output telnet ssh scheduler allocate 20000 1000 ntp master 1 end C2811#Go to See the other 17 answers Please help me , I have problem with registering Cisco SIP phone 9971 with CME 8.6 on ISR 2901.

Application: SRSV-CUE Running on ISM interface Gigabit Ethernet0/1 no ip address no ip route-cache shutdown duplex auto speed auto interface ISM0/1 description Internal switch interface connected to Internal Service Module shutdown interface Vlan1 no ip address no ip route-cache shutdown ip forward-protocol nd no ip http server no ip http secure-server snmp-server community public RO tftp-server flash:dkern9971.100609R2-9-1-1SR1alias dkern9971.100609R2-9-1-1SR1tftp-server flash:kern9971.9-1-1SR1alias kern9971.9-1-1SR1tftp-server flash:rootfs9971.9-1-1SR1alias rootfs9971.9-1-1SR1tftp-server flash:sboot9971.031610R1-9-1-1SR1alias sboot9971.031610R1-9-1-1SR1tftp-server flash:skern9971.022809R2-9-1-1SR1alias skern9971.022809R2-9-1-1SR1tftp-server flash:sip9971.9-1-1SR1.loads alias sip9971.9-1-1SR1.loads tftp-server flash: United_States/g4tftp-server flash: English_United_States/control-plane voice-port 0/0/0 voice-port 0/0/1 voice-port 0/0/2 voice-port 0/0/3 voice-port 0/1/0 voice-port 0/1/1 voice-port 0/1/2 voice-port 0/1/3 mgcp profile default gatekeeper shutdown line con 0 line aux 0 line 67 no activation-character no exec transport preferred none transport input all transport output pad telnet rlogin lapb-ta mop udptn v120 ssh stopbits 1 line vty 0 4 password jebiga login transport input all end I did not have any kind of problem with X-LITE to register to CME.

also try with few SCCP phones 7940 and I did not any kind of problem .

A4B0.3B0D type 9971 number 3 dn 3 presence call-list dtmf-relay rtp-nte username dejan password 1234 codec g711alaw no vad license udi pid CISCO2901/K9 sn xxxxxxxxxxxx hw-module ism 0 hw-module pvdm 0/0 redundancy interface Gigabit Ethernet0/0 description INTERFACE INTERNAL no ip address no ip route-cache duplex auto speed auto no mop enabled interface Gigabit Ethernet0/0.2 description LAN DATA encapsulation dot1Q 2 ip address 192.168.2.251 255.255.255.0 no ip route-cache interface Gigabit Ethernet0/0.5 description LAN VOICE encapsulation dot1Q 5 ip address 192.168.5.251 255.255.255.0 no ip route-cache interface ISM0/0 no ip address no ip route-cache shutdown !

You could easily edit the command below to be more granular if you'd like.

Please help me , I have problem with registering Cisco SIP phone 9971 with CME 8.6 on ISR 2901.

There are a variety of free SFTP servers available out there.

Note that the command below will transfer all files in the /Desktops/320x212x16 directory (specific to the 7945/7965 per the chart above).

Leave a Reply